Putoline

Tech Chain kettingspray 500ml

The Putoline Tech Chain chain spray is a sophisticated lubricant for protecting the O-ring and MX motor chains. Suitable for a wide range of conditions and through the ceramic additive and a PTFE additive provides the optimum protection of the chain and sprockets.

Why Putoline Tech Chain chain spray use?

is precisely in extreme conditions, the chain motor is subject to considerable wear and tear. The Tech Chain Putoline formula is reduced to a minimum. This results in better performance in terms of transmission and start the engine chain and gears much longer.

Putoline Tech Chain chain spray

Ensure that the motor chain is properly cleaned before applying the chain spray. In addition, it is important that the chain is dry. Shake the sprayer with spray Tech Chain well before use and apply to all around by rotation to the rear wheel to a layer through the inside of the chain. This is most effective when the chain is still warm because it can penetrate deep between the links. Ensure preferred that the chain has dried before you start driving.

As lubricate your engine chain;

1. Ensure that the motor chain is clean;
2. Shake the sprayer before use;
3. Spray the chain once turned fully on by the wheel around;
4. Make sure the chain spray is dry before you go riding again

Properties Putoline Tech Chain Chain Spray

• 500 ml aerosol can with chain spray
• Designed for sports and professional use
• Provided with ceramic and PTFE additions
• Suitable for O-ring chains, and MX